Megaphonix In-Room

MEGAPHONIX IN-ROOM

IN ROOM
  • Impact and dynamics for a real home cinema experience
  • High sensitivity, very low distortion
  • Precise pattern control

Designed for dedicated home cinemas, the Megaphonix In-Room delivers effortless power and controlled dispersion to achieve the impact of a real cinema experience.

Cinema Black

Available finish

$1595.00 PER UNIT

Cinema Black with Grille

“Simply Superb”

– Australian Best Buys Audio & AV Magazine

“Simply Superb”

– Australian Best Buys Audio & AV Magazine

EXPERIENCE DYNAMICS

The Megaphonix In-Room are designed specifically for in room use in dedicated home cinemas. Using high power handling and high sensitivity drivers, these speakers will deliver all the impact and dynamics you need for a real home cinema experience, without the need for a big wattage power amplifier.

 

The 255mm bass driver has a 50mm voice coil and has been developed to offer low harmonic distortion, especially in the critical midband. The paper cone and surround of the bass driver have been developed to provide the smoothest possible response. The high frequency drive unit is a specially-damped, high power, 26mm doped fabric dome tweeter, and is coupled with Krix’s proprietary waveguide to provide consistently-maintained optimum dispersion of 90 degrees horizontal and 40 degrees vertical over the entire working bandwidth.

 

The combined high frequency response of the Megaphonix In-Room provides an exceptionally smooth and well-controlled sound – a new benchmark in loudspeaker reproduction.

 

The enclosure is braced and critically damped, with proprietary Krix rubber feet to improve acoustic isolation on hard or soft surfaces.

 

The Megaphonix In-Room a member of a five-speaker family, allowing you to combine it with main or surround speakers for a connected, clear and smooth sound experience.

 

For the ultimate cinema experience at home, play it through Krix.

SPECIFICATIONS

Frequency range
40Hz-20kHz in room response

Power handling
50-250 Watts RMS recommended amplifier power

Sensitivity
95dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure type
Bass reflex, front vented

Dimensions
939mm high x 315mm wide x 205mm deep

Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Crossover point
1.8kHz

Input terminals
High current terminals featuring 5mm hole to accept up to 10 AWG cable

Weight
19kg each

“Suspension of disbelief is easy when a sound system is this good…”

– Jez Ford [Sound+Image Magazine]

REVIEWS / AWARDS
Best Buys Audio & AV Magazine

 

For a real ‘cinema sound’ at home, it makes sense to use similar technology to the real thing, to get the experience as close as possible. But why compromise on ‘close’? The Krix Series SX range is the real thing, scaled down to fit within the constraints of the home. It proved monumental in its ability to deliver soundtracks at full throttle, yet delicate and sophisticated enough to play music at the heights of realism. Simply superb.

Sound+ Image Awards 2016 – Custom Installation Product of the Year

 

Series SX are a home cinema fan’s dream. Built for multiple installation applications, these highly sensitive speakers can fill your dedicated room with spine-tingling, gut-wrenching cinema sound. Sound+Image Magazine agreed, and awarded the range the Custom Installation Product of the Year.

COMPLEMENTARY PRODUCTS

THE HORN – LATEST ENTRIES