SYSTEM RECOMMENDATIONS

Minimum screen size 16:9
95″ (2103mm x 1183mm)

Minimum screen size 21:9
100″ (2335mm x 1001mm)

‍

LCR SPEAKER MODULES

Frequency range
40Hz-20kHz in room response

Power handling
100 – 500 Watts RMS recommended amplifier power

Sensitivity
97dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable

Dimensions
940mm high x 315mm wide x 205mm deep (2040mm wide including subwoofer modules)

Weight
15kg each

‍

SUBWOOFER MODULES

Frequency range
25Hz-200Hz in room response

Power handling
200 – 500* Watts RMS recommended amplifier power
* The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers.

Recommended processing
High pass filter: 30Hz 24dB / Octave Butterworth
Limiter: 500W (4 Ohms)

Sensitivity
92dB for 2.83 volts at 1 metre

Impedance
4 Ohms

Enclosure type
Bass reflex, down-firing vents

Low frequency driver
Nominal 305mm (12”) diameter paper cone driver with 50mm (2”) long throw voice coil developed for high level, low frequency reinforcement

Input terminals
High level gold plated spring terminals

Dimensions
940mm high x 540mm wide x 205mm deep (2025mm wide including LCR modules)

Weight
26kg each

Designed for medium size dedicated cinema rooms, the MX-10 presents the next level of modular home cinema performance, housing the same Krix waveguide and mid-bass driver of its bigger brother, the MX-20.

The MX-10 comprises of five modules, all of which are the same height and a slim depth of just 205mm for simple installation into a wall cavity. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.

The main speakers feature a 255mm bass-mid driver which has a 50mm voice coil developed to offer low harmonic distortion, especially in the critical midband.

The high frequency drive unit is a damped, high power, 26mm doped fabric dome tweeter, coupled with a proprietary Krix waveguide, for optimum dispersion over the entire working bandwidth. Each subwoofer contains a large 305mm paper cone driver with a 50mm long throw voice coil developed for high level, low frequency reinforcement.

For the ultimate cinema experience at home, play it through Krix.